With our basalt fibres you are technologically up to date. Compared to conventional fibres made from alkali resistant glass, laboratory tests prove up to 20% higher flexural strength of the concrete. Basalt fibres are also more heat resistant than glass fibres and thus the ideal reinforcement for refractory concrete, such as our GRISU®.
Rely on our basalt fibres for both refractory and normal concrete. The fibers are protected by a special waterproofing and thereby not sensitive to any alkalinity of the concrete. Use our CONCRETE CALCULATOR and the TEXTILE REINFORCED CONCRETE MANUAL to choose the right quality for you.
Shown here is type 22 with the following material properties:
Material: Basalt
Grammage: 212 g/m²
Specific density: 2.7 g/cm³
Mesh width lengthwise: 25.2 mm
Mesh width across: 24.4 mm
Fibre cross-sectional area lengthwise: 26.7 mm²/m
Fibre cross-sectional area across: 26.7 mm²/m
Yarn tensile strength: 1870 N/mm²
Tear resistance lengthwise: 2500 N/5cm
Tear resistance across: 2500 N/5cm
Modulus of elasticity: 95,000 N/mm²
The recommended overlap on joints is 30 cm.
Buy basalt fibres for concrete from renowned manufacturers in our Moertelshop that are not available at your local DIY shop. Order here online and take advantage of our unbeatable cheap shipping.
